Sale!
 

Steel Seal

Il prezzo originale era: 75.00 €.Il prezzo attuale è: 69.00 €.

SEALS EFFICIENTLY LEAKING TOP PACK GASKS

Succeeds in 99% of cases

Money back if it does not succeed

Fits all engines with a waterborne cooling system

The market’s best and most proven solution

Save thousands of kronor by doing it yourself, compared to submitting to a workshop

Steel Seal is a simple do-it-yourself product for sealing cylinder head gaskets. Steel Seal is a sealant that becomes as strong as steel and seals permanently. Steel seal is the market leader and has extremely high customer satisfaction. We have sold thousands of bottles since 2013 and in very few cases have had complaints, these complaints have probably been due to the damage being too serious and that then only replacement of parts was the alternative.

We are actually so confident that STEEL SEAL will seal your leaking cylinder head gasket that we offer your money back if it does not work.

 

Descrizione

Steel Seal is a simple do-it-yourself product for sealing cylinder head gaskets. Steel Seal is a sealant that becomes as strong as steel and seals permanently. Steel Seal can be used in all types of cars and engines that have a water-borne cooling system, regardless of whether it is petrol or diesel, and does not clog the cooling system. Steel Seal will seal all types of broken cylinder head gaskets, cracked engine blocks, loose cylinder liners and skewed cylinder heads.

Compatible with all types of traditional coolant. Steel Seal has not been confirmed to be compatible with waterless coolants or pure coolant as water must be present in the cooling system.

 

Supply:

1 bottle: Engines up to 2.0 liters displacement
2 bottles: Between 2.0-4.0 liters stroke volume
3 bottles: Engines over 4.0 liters displacement

Step by step instructions

Ensure engine is cold and remove the radiator cap. Pour Steel Seal directly into the radiator. Replace cap. NB: If you don’t have a radiator cap pour directly into the expansion tank.


Turn heater and fan to maximum. Start engine and run the vehicle up to temperature. Once vehicle reaches operating temperature, idle for 30 minutes. Turn off vehicle and allow to cool completely. Top up with antifreeze/water as necessary and replace radiator cap.



Leave the Steel Seal in your system and drive the vehicle as usual.



NB: We recommend flushing the cooling system before use to remove any other chemicals, and refilling with blue ethylene glycol.

SEAL FOR LEAKING HEADGASKET IN THREE SIMPLE STEPS:

SS instruktioner

For best possible result:

If you have tried other substandard products, rinse your cooling system with plain water after removing the lower radiator hose to the radiator. Do not use radiator cleaners.

After rinsing the cooling system, reconnect the lower radiator hose to the radiator.

FURTHER STEEL SEAL INSTRUCTIONS:

These instructions are for those who have overpressure in the cooling system, which usually shows up as bubbles in the expansion vessel or air puffs out of the radiator cap.

Find which cylinder is causing the overpressure in the expansion vessel or the back pressure. (Remove one spark plug at a time until it stops bubbling)

Before starting the engine, remove the spark plug or fuel injection from the cylinder that caused the bubbles in the expansion vessel or overpressure. If you can access it, also remove the fuel injection cord from that cylinder to limit the amount of unburned fuel.

– If you do not find the spark plug that causes the bubbles, run the engine with the coolant so that it covers the top of the heat sinks in the radiator with the radiator cap off. or leave the lid of the expansion vessel off and hold in only so much water that you can just see it.

– Be sure to let the engine run until it warms up with the spark plug / fuel injection removed and let the engine run one last time with the spark plug / fuel injection retrofitted.

STEEL SEAL FAQ

Down below you can see some of the most common questions we get about our product Steel Seal.

WHAT IS THE HISTORY OF STEEL SEAL?

The product was developed in the USA and has undergone some strict independence and laboratory tests, Scott Laboratory has performed a thorough evaluation of both Steel Seal and its competitors and concluded that Steel Seal was superior to all other products tested. Steel Seal has been successfully used in hundreds of thousands of vehicles. Steel Seal has been on the market since November 1999. It was launched by sending out 80,000 information videos to almost every workshop in the United States. This was followed by advertisements in the magazines Motor Age, Underhud Service, Auto Remarketing, Used Car News, Used Car Dealer and Tech Shop. The combination of these magazines meant that the information reached virtually all workshop managers, mechanics and car dealers in the United States. The main advantage of Steel Seal is the durability of the seal. The formula creates a seal that on a molecular level is very similar to the different materials that an engine is made of, so that the seal expands and contracts at the same rate as the engine. This leads to an excellent service life of the seal.

WHAT IS STEEL SEAL MADE OF?

Steel Seal is made of several different chemicals, which when combined under the right circumstances, create a seal that is as strong as steel.

HOW DOES STEEL SEAL WORK?

Steel Seal is used as an additive in the coolant and is poured into the radiator of a cold engine. When the engine is then started and reaches working temperature, Steel Seal will be distributed in the engine. The product is drawn to the damaged area and seals the leak with a thermochemical bonding process. It is similar to epoxy resin but in liquid form.

WILL STEEL SEAL SEAL THE COOLINGSYSTEM?

Steel Seal is a clear liquid that does not contain any fibrous materials or particles that clog the cooling system. You can see it for yourself by just looking through the bottle.

WILL THE GLYCOL IN THE COOLANT AFFECT THE SEALING?

No, while the product can be used together with all types of traditional coolants, we recommend that you use a coolant of good quality that is a maximum of two years old.

HOW LONG WILL STEEL SEAL HOLD?

With Steel Seal, the seal is permanent under normal conditions, but there is always a risk that it will start to leak elsewhere in the engine.

WHAT DOES STEEL SEAL NOT SEAL?

Steel Seal will not seal leaks in hoses, gaskets, water pumps or extremely large cracks in the top or engine block that cause the car not to start. If the car does not start, the Steel Seal will not work so it relies on heat.

IS STEEL SEAL A FRAUD?

No Steel Seal is not a scam and we offer a simple money back guarantee. Talk to one of our resellers and see how much trust they have in the product.

WHAT SHOULD I DO IF I HAVE USED AN INVALID PRODUCT THAT SAYS IT HAS SIMILAR PROPERTIES?

There are several good products on the market such as K-seal, Holts Radweld and Seal up but they rely on fillers unlike Steel Seal and therefore they break down. The cooling system must be flushed with water, not a coolant for the cooling system.

ARE THERE ANY SPECIAL PRECAUTIONS I SHOULD TAKE WHEN I USE STEEL SEAL?

Steel Seal should be kept out of the reach of children. Avoid contact with eyes and skin. If eyes or skin become irritated with Steel Seal, rinse immediately with cold water. If swallowed, do not induce vomiting. Contact a doctor immediately.

HOW MUCH DO I NEED?

Engine size Bottles Under 2.0 liters: 1 bottle Over 2.0 liters: 2 bottles Over 4.0 liters: 3 bottles.

SHOULD I EMPTY OUT THE COOLING SYSTEM BEFORE USE?

You need clean coolant in the system, if it is old or full of oil, you must first change the coolant and then pour in the Steel Seal.

MY CAR LEAKS OIL AT THE CYLINDER HEAD?

Steel Seal will not repair oil leaks, only leaks related to coolant in the cylinder head. Nothing can stop oil leakage at the cylinder head except a change.

STEEL SEAL NEVER WORKS

It certainly works, but of course no sealant can fix a hole that is too large.

I AM TRYING TO USE STEEL SEAL FOR THE SECOND TIME SINCE MY CAR STILL OVERHEATS, DO I NEED A NEW COOLANT?

If the coolant is fresh and clean, pour in the Steel Seal, it is dirty, so replace it first.

MONEY BACK GUARANTEE

If Steel Seal cylinder head seal is used for a broken cylinder head gasket and it does not work, we are more than happy to offer you full replacement as a maximum up to the recommended retail price seen on our website, or a replacement bottle (only once).

All you need to do is provide us with:

  • Purchase certificate for Steel Seal from an authorized dealer listed on our website.
  • A written statement from a car repair shop which, via compression test or gas test, states that you really have a broken cylinder head gasket. Or a written confirmation that the car has been scrapped. Or a receipt showing that you have recently renovated the cylinder head gasket.
  • Registration number

TERMS:

  • Only one refund per vehicle
  • The recommended amount of Steel Seal must have been used up to a maximum of three bottles.
  • All claims for compensation must be sent to us in writing within 28 days from the date of purchase together with the information above.

    CUSTOMER REVIEWS

    LIGHT WASTER LOSS AND HEATING

    FREELANDER V6 2002

    “My car mechanic vented the cooling system as I had sporadic problems with the temperature gauge that began to live its own life. Leaked about a pint of water a day. He performed a test that showed that I had a small leak in the cylinder head gasket. I had previously tested other products that seal cylinder head gaskets that did not work at all. My mechanic recommended that I try Steel Seal as he only heard about one case when it did not work. I bought and poured in and now it has been two weeks without water leakage or overheating problems. I’m so thankful!”

    Anthony Lowery

    COOLANT DISAPPEARS, WEIRD LEAK

    VOLVO 940, 1998

    “Used Steel Seal a few months ago to fix a mysterious leak in the cooling system. It was easy to use and I have not had any more problems.”

    Philip McDonald

    COOLANT LEAKING AT HEAVY ACCELERATION

    RANGE ROVER SPORT 4.2 SUPERCHARGED

    “Can not understand how this would work as I am a car engineer and was skeptical, but I must say that this is incredible and it fixed my car. Now I’ll try to pour it into my race car. That’s how good it is !!!”

    J Barnes

    MISFIRE AND WATER IN THE EXHAUST

    HONDA CIVIC 2003

    “The coolant level dropped quickly, the car overheated, did a pressure test, broken cylinder head gasket. Fantastic product, it does what it says according to the bottle.”

    BROKEN HEADGASKET – WATER IN THE CYLINDERS

    OPEL FRONTERA B 2.2 1999

    “My car went like a steam locomotive with water vapor from the exhaust pipe and misfires. Did as it said on the bottle and it seems to have done as it should. Checked the fluid level and it has not moved at all, the car runs as it did before the cylinder head gasket broke. I’m very happy with the Steel Seal.”

    Andy North

    CRACK IN ENGINE BLOCK (ICE DAMAGE)

    MASSEY FERGUSON 1947 TRACTOR

    “Engine block in cast iron as leaked coolant into 3-4 Stables. Have never used Steel Seal before but after 30 minutes it stopped leaking coolant. The engine ran for another 30 minutes and there are still no leaks, I am very impressed. Will buy me another bottle and use again.”

    David Parry ( Dave’s Auto’s )

    OVERHEATING, OIL IN COOLANT

    MITSUBISHI L200 2.5TD 2003

    This is the first time I use Steel Seal and I am so happy with the result, just as it said on the bottle, it has fixed the problem with my cylinder head gasket. I highly recommend this product to everyone as it is not only very effective but has also saved me several thousand kroner. An excellent product. Paul

    PAUL GREIG

    LEAKAGE

    FORD ESCORT 1.6

    “I thought it was the end of my faithful Escort when the cylinder head gasket started leaking. Now it is almost new. Just follow the instructions… it works !!!”

    ian clark

    MAYONNAISE IN THE EXPANSION TANK

    ROVER 214SI 1997

    “This product is incredible, simply amazing. I have never believed in “floating repairs” like this. After 100 km, the pressure test shows ok and there is no more oil in the water tank. My Rover 214 is saved! I will always be grateful.”

    roby spanish

    WHITE SMOKE COMING FROM THE EXHAUST

    VW GOLF MK2 1991

    “When I first saw this product, I thought that it can never work. But after three weeks, everything is still fine. Would recommend it to everyone as it is well worth testing if you think you have a broken cylinder head gasket.”

    jon-jo thompson

    WATER LEAKAGE

    MG ZS

    “Even though it was just a small leak, it was still worrying. I contacted the car workshop that usually services the car and after a quick look, they came to the conclusion that it might be the cylinder head gasket that was about to go with it and that it would cost between 5000 and 7000 kronor to repair. I therefore bought a bottle of Steel Seal because I had nothing to lose. I was careful to follow the instructions and the result came immediately and was perfect. I just saved SEK 5,500. I would not hesitate to recommend this product to anyone who is considering trying it.”

    Ian Burdess

    COOLANT LEAKAGE

    ISUZU TROOPER 3.0 D 2001

    “I noticed that there were water deposits on two of the spark plugs when I replaced them. Which confirmed my suspicions as I have regularly filled coolant. After two bottles of Steel Seal, the problem is now solved and a potential nightmare has now been avoided. Thanks!”

    damian timlin

    CHOCOLATEOIL IN CYLINDER HEAD

    ROVER 2002

    “Stunning – wonderful – amazing. I was so unhappy that I had saved so much for a trip and a Nintendo Wii for my five year old, when I was told that it would cost 10,000 of more than one workshop to fix the problem when I was recommended to try Steel Seal. Really thank you very much, it worked better than expected. We will tell more about your product when we are on the trip.”

    Rory Keen

    LEAKAGE FROM THE SIDE OF THE CYLINDER HEAD

    ROVER FREELANDER

    “A small leak from the cylinder head on the side with the timing belt. The problem was solved with Steel Seal. Thanks so much! Rover Freelander 1, 54 plates.”

    R J Ekin

    CONSTANT DESCENDING WATERLEVELS IN EXPANSIONTANK

    2004 MG TF 135

    “I was really hesitant about something that comes in a bottle and promises to fix the problem.! But I got proof that I was wrong. Thanks for following the instructions. And my MG has stopped drinking so much water and the performance is like when the car was new. So I’m really impressed. Had not noticed that the car had lost power until I poured in Steel Seal. It is an incredible product that works!”

    Stephen Aylott

    OVERHEATING AND CONSUMING COOLANT

    FORD FIESTA 1.25

    “Fantastic product. Just follow the instructions on the bottle. We have used this product a few times in our car workshop for our customers who cannot afford to repair the cylinder head gasket. Of all the cars we have tested it on, only one did not work and that was because the damage to the engine block was too great and even then the people at Steel Seal were wonderful on the phone.”

    C. Norris

    WATER IN OIL

    OPEL CORSA 1.2 16V

    “Steel Seal uses a student’s Opel Corsa with a broken cylinder head gasket. He simply could not afford to replace the cylinder head gasket. Steel Seal worked perfectly. I recommend it to everyone before you change the cylinder head gasket.”

    Chainbridge mot centre

    WATER LEAKAGE

    AUDI A3 2006

    “Our car had been drinking water for a year, a new radiator, a new water pump and still needed to be refilled. Used Steel Seal and now it is fixed, no problems and it no longer drinks water.”

    ROBERT

    WHITE LIQUID ON THE OILCAP

    1999 MERCEDES E280 W210

    “Had problems with white mud that accumulated on the oil cap but nothing on the stick. Tried a few other products to see if there really were problems with the cylinder head gasket but none of these products seemed to work. As a last resort I tested Steel Seal and pulled backwards, within a few minutes the deposits on the oil cap had disappeared so it worked for me and I only needed to use one bottle even though two were recommended. I followed the instructions to the letter and it seems to have worked. The engine runs smoother under load and idling has improved. For my part, I would like to recommend the product to anyone who has a problem with leaking coolant. It does exactly what it claims on the bottle and it works. Thank you so much to everyone at Steel Seal who has saved me several thousand dollars in workshop costs.”

    K. Ren

    SAVED OVER 600€

    ROVER 216 CABRIOLET 1996

    “I was skeptical at first but after receiving a cost estimate of 3500 to repair the cylinder head gasket together with the money back guarantee, I gave it a try. The result – no more overheated engine, fault or water vapor from the exhaust pipe. Well done and easy to use. Many thanks!”

    Iain Caldwell

    UNEVEN DRIVING, CONSUMING COOLANT

    PEUGEOT 206 1.4 1998

    “This is the second car I have used Steel Seal on. The other was a 1.8 Freelander 18 months ago and it is running at full capacity. It has worked on both cars and saved me several thousand dollars. Easy to use. Literally just pouring in and letting the engine run. There is no other product I have ever used that has given the results it has promised. really keep what they promise. Do not listen to the critics who say that there is no shortcut to fixing a broken cylinder head gasket. Because there is!”

    Emily Kaldwin

    BAD PERFORMANCE, CONSUMING WATER

    2001 PEUGEOT 406

    “Watched the video and also the youtube video regarding the 406. Drained the cooling system, flushed the engine and refilled. Followed the instructions and hear and be amazed, after an hour it was ready. Two days later I tested on the camper without any problems. I have to save a few thousand. Thanks Steel Seal.”

    C. Attano

    CONSUMING LARGER SCALES OF COOLANT, OIL IN THE WATER

    FORD MONDEO 1998 1.8L PETROL

    “Recommended by the workshop, Felton Wigan Road Euxton. The Steel Seal was poured in and the car idled for an hour. The problem is solved and has not had to refill coolant for over two months. I am very pleased as the option to tear down the top would not have been financially defensible.”

    J. Shepard

    CRACK IN ENGINE BLOCK

    RELIANT ROBIN (TRIKE) 1986

    “After building an engine from two, I was devastated when I saw that the engine block was cracked. A guy at Jamar engine factory suggested Steel Seal. I was very skeptical and tried mild meringues !!! I will share on all trike forums and facebook pages !!! Fantastic product! Thank you so much Steel Seal !!!”

    A. Smith

    LEAKING COOLANT BEHIND MANIFOLD

    MG ZR 1.4 2004

    “I was going to give it a try before I tore down the engine as it sprayed coolant straight out behind the manifold and I had to refill every day. Take off my hat for Steel Seal, which is a wonderful product as it fixed the problem after an hour and a bottle. Thanks Steel Seal.”

    J. Johnsson

     

    Complaints about consequential errors

    The refund if the treatment has not worked is considered an offer of complete and final settlement against any fault / defect claims arising from the use of Steel Seal, at the time of purchase this will be considered to have been approved by you and is therefore contractually binding.